IBR-Non IBR Fittings

The 90° pipe elbows is used to connect tubes at a 90° angle. As the name suggests, the elbow is always a right-angle in shape. Such type of elbow is also known as "90 bends or 90 ells". This is a pipe fitting device which is bent in such a way to produce 90° change in the direction of flow of the fluid/gas in the pipe. The elbow is used to change the direction in piping and is also sometimes called a "quarter bend".

A 90° elbow attaches readily to pipes of various materials like plastic, copper, cast iron, steel, lead, rubber etc. In other words, the 90° elbows are used to provide a joint between two pipes at right angles to each other. They are used as railing ends or corners on a level installation.
Materials used:
Materials used in 90° angle are as follows:

• PVC
• Rubber
• Copper
• Cast iron
• Brass
• Stainless steel
• Bronze
• Galvanized steel
• Aluminum etc

Concentric Reducer: Concentric reducers are used to properly reduce into and out of circulating pumps The concentric reducer pipe fitting also allows both the inlet and outlet ends to align to a common center line.Some of the important parameters used to select a concentric reducer are pressure/vacuum, max temp compression, approximate force, elongation etc.They are manufactured in various alloys, schedules, sizes and flange configurations. Concentric reducers frequently trap air when used at the suction of the pump. Concentric reducer save installation space and reduce costs.Piping systems must be anchored when using concentric reducer.
Standard: ANSI B16.9 / 16.28, ASTM A53/A106, API 5L, ASME B36.10M---1996, DIN2605 / 2615 / 2616, JIS P2311/2312Thickness: SGP, STD, SCH40, SCH80, SCH160. XS,XXS and so on.Size: 1/2"--60" view beveling ... Material: Carbon steel , alloy steel, stainless steelSurface treatment: Transparent oil, rust-proof black oil or hot galvanized.
Applications: Some of the industries where they find application are oil, gas, petrochemical, onshore and offshore sectors.

An Eccentric reducer, also called a Bell reducer, has two female (inside) threads of different sizes with centers so designed that when they are joined, the two pieces of pipe are not in line with each other, but they can be installed so as to provide optimum drainage of the line.

An eccentric pipe reducer fitting is designed with the smaller outlet off center to the larger end, allowing it to align with only one side of the inlet. The high quality reducer fittings are designed to be welded with ease and offer superior strength and leak resistance.

Eccentric pipe reducer must be installed with straight side up to prevent trapping air at the pump suction. They are designed to allows simple connection of different sized pipes. These can be used as pipe reducers flexible connectors and vibration eliminators.

Details:

Material: Carbon steel, alloy steel and stainless steel.
Size: 1/2"-48" DN15-DN1200
Pressure: Sch5-Sch160 XXS
CCS, API, and ISO9001: 2000 Certificates etc.
Standards: ANSI, DIN, JIS, BS, ISO, GB, SH, AND HG etc.,
Carbon steel: ASTM A234 WPB, WPC, ASTM A420 WPL1, WPL3, WPL6, WPHY42, 46, 52, 56, 60, 65, 70
Alloy steel: ASTM A234 WP1, WP12, WP11, WP22, WP5, WP7, WP8, and WP91
Stainless steel: ASME A403 WP304, 304L, 316, 316L, 310
Standards: ANSI, DIN, JIS, GB, ASTM, JB, SH, YB, SY, HG, API
Use: Petroleum, chemical, power, gas, metallurgy, shipbuilding, construction, etc

Stub ends made of exotic metals, stainless steel etc. , in various grades. Our high quality stub ends (butt weld fittings ) are tested and verified for durability, accuracy and precision. The stub ends are manufactured in all standard dimensions. The stub ends are provided with a standard weld bevel and can be available in squared, flanged, victaulic and threaded ends. We offer stub ends at highly competitive prices.

We provide our clients with a robustly constructed gamut of tees that are made from stainless steel, brass, bronze and copper. Suitable for varied industry verticals these tees are highly acclaimed for their qualitative features. Our clients can avail these tees from us in customized specifications and at market leading prices.

We offer our clients an extensive range of buttweld nipples, which is available in wall thicknesses, sizes and dimensions. In our range, we offer swage nipple & barrel nipple that is offered in various grades. These are used as an extension to any pipe assembly and find application in numerous industries.

Range:
15 mm NB upto 1200 mm NB in Schedule 5S, 10S, 10, 20, 40S, 40, STD, 60, 80S, 80, XS, 100, 120, 140, 160 & XXS

Stainless Steel
Grade : 304, 304L, 304H, 309, 310, 310S, 316, 316Ti, 316 L , 317, 317L, 321, 347, 347 H, 904L

Duplex Steel
Grade : 2205 (UNS No. S31803), 2507 (UNS No. S32750)

Nickel Alloy

• Grade : Nickel 200 (UNS No. N02200)Nickel 201 (UNS No. N02201)
• HASTELLOY C - Monel 400 (UNS No. N04400) Monel 500 (UNS No. N05500